How To Change Toyota Windshield Wipers

Windshield wipers aren't given much thought until they are needed. Eventually, wiper blades will need to be replaced when there is rubbing, or the screech of old wipers when it rains, or an inconvenient rubber piece hanging from the wiper. If that happens, you'll appreciate knowing how to change your Toyota windshield wipers.

Changing windshield wipers can be challenging if you haven't done it before. Below is an easy guide on how to change Toyota windshield wipers all by yourself.

Choose the Right Size

The right size of wiper blades can be found using different methods.

The wiper blade arm on most Toyota vehicles has a J-hook design. It is possible, however, that they may differ slightly in every Toyota model. That is why it is important to know your car's year, model, and make.

You can usually find it in your local mechanic store, hardware shops, or Toyota service shops by checking the wiper blade aisle. These sections usually have manuals or little digital screens kept near the blades that list wiper blade sizes based on the model.

If this is not feasible, you can measure your wiper blades and find one of the same size.

Removing an Old Windshield Wiper

Step 1: The blade arm should be lifted away from the windshield. It might be convenient to have a folded rag placed on the windshield in the case of any accidental wiper blade arm swings.

Step 2: Make sure that the blade is perpendicular to the blade arm by turning it 90 degrees.

Step 3: Pull the blade toward the vehicle while pressing and holding the tab on the hook that holds the blade.

Step 4: Consequently, the hook will push the rubber part of the blade and render it shapeless. This will give you space to slide the blade to the side and remove the hook.

Step 5: Remove and dispose of the worn-out blade from the hook.

Installing a New Windshield Wiper

Step 1: When the new blade is in hand, keep the rubber side up, and locate the rotating part around the center. Rotate it to about 90 degrees.

Step 2: Hook the blade arm over the hole where the rotating piece is used to rest in the solid part of the back.

Step 3: Pull the wiper blade solid back away from the vehicle once the arm hook has been secured over the rotating part of the blade.

Step 4: Remove your protective rag from the windshield, align the blade arm with the blade, and place it on the windshield. You're done!

Conclusion

It is important to note that not all wiper blade systems are the same. Depending on your wiper blade connection, you may need to find out how to change your wiper blades. If the above steps sound like too much work and hassle for you, you can just take your car to Toyota service centers near you and have the experts do the job for you!